INTRODUCING THE RUBICON

The Rubicon™ is a modular enclosure system specifically designed to help deploy and protect your projects in style. It is IP67 water and dustproof, supports glands and conduit fittings, and is designed to be installed just about anywhere. Compatible with Raspberry Pi, Arduino, BeagleBone and of course, Quasar and Pulsar.

ROBUST

  • Rubicon is IP67 rated and has been tested in 1 meter (40 inches) of water for 30 minutes.
  • May be stacked 2x without loss of IP67 rating.
  • Every Rubicon enclosure has a machined 0.138” (3.5mm) thick aluminum base plate that is strong and light, yet is easy to modify.
  • Rubicon is designed to be mounted without opening the enclosure.
  • Compatible with standard wood screws, and up to M5 bolts.
  • UV resistant.

VERSATILE

  • Approximate size: 3.45 x 5.4 x 1.7+ inches (88 x 137 x 45 mm).
  • Available in grey or orange, covers also available in clear acrylic.
  • Deep and shallow covers are available.
  • Mounting patterns for Raspberry Pi (A+/B+/2/3), BeagleBone, or Arduino Uno / Zero.
  • May mount up to 2 shields/HATs/capes (varies with height).
  • Designed to be compatible with up to PG16 waterproof glands, ½” (US) conduit fittings, and SMA/RPSMA radio pass-throughs

 

DATASHEET

MODULAR & RUGGED

With its modular design Rubicon is stackable for additional room when your project demands more space.

The Rubicon combines high quality, extreme durability and superb flexibility – great for a wide range of indoor and outdoor applications such as sensors, IoT gateways, controllers and many more. Rubicon is ready to shield your Raspberry Pi, BeagleBone, Arduino, and other custom hardware from sun, rain, snow, and flood.

UV-RESISTANT

Its UV-resistant case provides protection from degradation in the sun and an aluminum baseplate acts as a heatsink for the electronics inside.

TOUCHABLE

A transparent plastic cover allows touchscreen integration for interactivity while keeping your project safe from the environment.

GLAND & CONDUIT COMPATIBLE

Industry-standard glands and conduit allow wires to pass through the weather-sealed platform for connections to sensors and other external systems your project demands. Holes are not pre-drilled because every project is unique.

RADIO FRIENDLY

An integrated antenna cover optimizes radio signals no matter where your project is located.

RUBICON KITS AND ACCESSORIES

Rubicon Starter Kit Contents:

  • 1 x Shell 11-001A
  • 1 x Cover 11-004A opaque (choose color and style)
  • 1 x Cover 11-004A clear (same style as above)
  • 1 x Base plate 12-001A-N
  • 1 x Gasket Kit 87-001A
  • 1 x Stacking Screws Kit 18-006A-K4 (M3x35, Stainless Steel)
  • 1 x Board Stacking Standoff Kit 87-012A-116B
    (4x M2.5 x 11mm height x 6mm thread — standard 0.435″ stacking height + screws and washers)
  • 1 x Board Mounting Standoff Kit 87-012A-072B
    (M2.5 x 7mm height x 2mm thread + screws and washers)
  • 1 x Rubicon Shell Screw Pack 87-003A
    (12 screws: 4x for mounting onto bosses, 4x for cover, and 4x for mounting onto the base plate)

Rubicon Stacking Kit Contents:

  • 1 x Shell 11-001A
  • 1 x Gasket Kit 87-001A
  • 1 x Stacking Screws Kit 18-006A-K4 (M3x35, Stainless Steel)
  • 1 x Rubicon Shell Screw Pack 87-003A
    (12 screws: 4x for mounting onto bosses, 4x for cover, and 4x for mounting onto the base plate)

Allows to stack multiple shells to make a deeper Rubicon enclosure. More than two shells may be stacked, although IP rating is not guaranteed.

Rubicon Heatsink Kit Contents:

  • 1 x Heatsink Riser
  • 1 x Heatsink Block
  • 1 x Mounting Hardware (M3x20 mm flat head screws, 8 washers)
  • 2 x Thermal Pad

Reduce Raspberry Pi processor temperature by up to 20° C with our heatsink kit. Read the write-up on our testing results right here!

RUBICON RESOURCES

The buttons below provide the information necessary to get your project planned and built.

.PDF – Spec Sheet and Manual
.ZIP – CAD Files (.STEP)

Exterior Dimensions 87.6 x 136.5 x 57.5 mm
3.45 x 5.38 x 2.26 in
Color Grey or Orange
Weight From 210 gm (approx.)
Temperature -40°C to 55°C
Humidity 0 to 100%
RoHS Compliant Yes
Mounting Screws M2.5 (Interior), M5 (Exterior)
Glands Up to PG16
Conduit Up to 1/2"

This will be available for Pre-Order shortly!

Get your name on the list

You have Successfully Subscribed!